junos_shutdown - Shut down or reboot a device running Junos OS.

Author:Jeremy Schulman, Juniper Networks

Synopsis

New in version 1.0.0.

Shut down (power off) or reboot a device running Junos OS. This includes all Routing Engines in a Virtual Chassis or a dual Routing Engine system. This is equivalent to executing either the Junos OS request system power-off or request system reboot operational command.

Options

parameter required default choices comments
at no None
    		Specify a time for the reboot (yyyymmddhhmm). Can be used only with reboot=yes.
    host yes
      		Set to {{ inventory_hostname }}
      in_min no
        		Specify a delay, in minutes, before the shutdown or reboot. If both "at" and "in_min" are specified, "in_min" will be ignored.
        mode no None
          		mode of console connection (telnet/serial). If mode is not provided SSH connection is used.
          passwd no assumes ssh-key active
            		Login password
            port no 830
              		port number to use when connecting to the device
              reboot no
              • yes
              • no
              		 If set to yes, then the device is rebooted rather than powered off.
              shutdown yes None
                		Safety mechanism. You MUST set this to 'shutdown'.
                ssh_private_key_file no None
                  		This can be used if you need to provide a private key rather than loading the key into the ssh-key-ring/environment. if your ssh-key requires a password, then you must provide it via **passwd**
                  user no $USER
                    		Login username

                    Note

                    Requires junos-eznc >= 1.2.2

                    Examples


                    - junos_shutdown:
    host={{ inventory_hostname }}
    shutdown="shutdown"
    reboot=yes

# over console server connection using PyEZ >= 2.0
- junos_shutdown:
    host={{ inventory_hostname }}
    shutdown="shutdown"
    reboot=yes
    mode='telnet'
    port=7016